CBPC
![CBPC](https://d7rh5s3nxmpy4.cloudfront.net/CMP2671/2/PR1534BI3047_0000000017_CBPC_SZ4.png)
Medium pressure, single inlet centrfugal fans, with backward curved impeller and vertical outlet, designed for spray booths
![](https://d7rh5s3nxmpy4.cloudfront.net/CMP2671/2/picto_sod_according_erp.png)
Fan:
• Sheet steel casing.
• Backward curved impeller made of sheet steel.
• With inspection hatch.
• With vertical outlet.
• Maximum temperature of air to be carried: -25 ºC +120 ºC.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz (up to 4 kW).
• Working temperature: -25 ºC +50 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Special windings for different voltages.
• ATEX certified Category 2.
• Sheet steel casing.
• Backward curved impeller made of sheet steel.
• With inspection hatch.
• With vertical outlet.
• Maximum temperature of air to be carried: -25 ºC +120 ºC.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz (up to 4 kW).
• Working temperature: -25 ºC +50 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Special windings for different voltages.
• ATEX certified Category 2.